Custom Walnut Box Click for larger image

Creating a box that is simple, but unique, and also beautiful, as well as protective, has been a very challenging and rewarding experience. I am thrilled to have taken on this project.

To be a part of this creation, which will be used to display and protect an antique family heirloom is special.

Life is a journey and this has been an enjoyable part of that process.

Custom Walnut Box Click for larger image

In planning out this project I decided to use finger joint construction on the corners. I felt it would add to the look and feel of the box. Not to mention it would also provide exceptional strength in the corner joints and additional protection. (The color difference between the first two photos is because the finger-joint photo is still the raw wood and the other photo is after I have began applying the finish coats.)

I am pleased in the end result!

The size of the box was determined using the measurements of the platter that would be stored inside.(1 1/2" x 13" x 15")

Custom Walnut Box Click for larger image

The top proved to be the most challenging. Hand selecting the right grain pattern and coloring caused me to look through a lot of boards before I found ones that I thought worked well together.

Matching the grains and colors I think worked out well. The color will only get richer looking as time passes. The top of the box has been laser engraved with a customized celtic cross and the words "Ardara, County Donegal" below it.

The laser engraving was done by Blue Dragon LLC in Columbia Falls, Montana using an Epilog Laser.

This process creates a very detailed sharp image by burning the image into the wood.

Custom Walnut Box Click for larger image

For the inside of the box I wanted to create a foundation which would display the platter as well as protect it. Using a high density foam padding I created a pocket to hold the platter and then covered the foam with a nice material.

The real test will come when the client places the platter in the box for the first time. Hopefully all the measurements I worked with will perfectly cradle it and protect it for many years to come.

The following are tools I used to create this custom Walnut box with finger - joints. They have been great and I highly recommend them. They can be purchased using the link provided in each item.

Freud 8'' Dado Set This stacked dado set features kickback-reducing shoulder design and cuts all sizes from 1/4" to 7/8". Perfect for shelving, joints, tongue and groove, and rabbets... Freud 8'' Dado Set

Woodsmith Fingerjoint Jig The easy accurate way to get perfect-fitting box joints. Attaches to any miter gauge, works on any table saw or router table... Woodsmith Fingerjoint Jig

Please Contact us if you have any questions or comments about your own Custom box or the web site.

Thanks for taking the time to visit our site.

Return to Custom box page